Self-priming pump with a stainless steel pump body and impeller. With the ability to draw water and liquids that contain air, they are ideal for the portable sanitation industry,
They pump water from IBCs, water bowsers or larger water tanks.
Electric 110v or 230v water pump, controller and self-regulating pressure switch, 16amp site plug and 1" brass filter assembled before the pump inlet.
Typically sold with a polypropylene box for wet weather protection. Box dimensions (mm): 600 long x 400 wide x 440 tall. Single skin polypropylene plastic with hinged lid. When sold with the protective box, hoses will fit through the vertical faces of the box so that the box lid remains shut.
Actual performance depends on the distance to be pumped, the actual flow required, the internal diameter of pipework used. As a typical example, if this pump is connected to a 4 person toilet block with just a few metres between pump and toilet, and all 4 toilets are flushed at the same time, the cisterns will require 24 litres to refill plus an allowance for water running through hand washbasins. In this scenario the application is hardly likely to require anything more than ca. 30 litres per minute, far below the potential performance of the pump.
We can advise on actual performance on a case-by-case basis.
Single Unit Weight : 14.5 Kg + packaging. Shipped by pallet service for protection.
